A Low cost introduction to the sniper role
This Airsoft Sniper Rifle is powered by a spring and is a bolt action design which needs to be cocked for each shot. It comes separated into two parts in the box and needs very minor assembly.
To put it together insert the Receiver into the Stock with the Barrel angled upwards at first, then push it level being careful of the Trigger Assembly. Once the two halves are together use the included Allen Key to secure the two integrated bolts on the underside of the Stock. To load the replica just use a Speedloader to fill the magazines with BBs, insert the magazine into the magwell and then work the bolt manually to load each shot, ensuring it clicks to the rear with each pull. Be sure to pull your bolt straight, as a lifetime of ragging it to one side can cause bolt issues in any Sniper Rifle. The top of the Receiver has a 20mm Receiver Rail which is ready for Scopes/Sights to be installed. The AGM 002 has an adjustable HOP unit which is controlled by a Slider at the front of the rifle, neatly exposed from the Handguard for easy adjustments in the field. There are Sling Points at the Front & Rear of the rifle to connect the included sling, however we recommend using a higher quality aftermarket sling and the one included is a little flimsy.
The Stock can be adjusted for length by removing the Butt Pad and adding/removing the spacers on the stock. The Cheek Pad can also be adjusted by loosening the Allen Bolts, moving the Pad into position and then tightening the Allen Bolts again. The front of the rifle has a Harris Style Bipod Lug, and traditional L96 Adapter Lug to accept a 20mm RIS adaptor. The Outer Barrel is threaded underneath the cap (supplier has warned that these can be very tight from new), and can accept the AGM002 Thread adapter to install 14mm CCW Muzzle Devices to the rifle. The Trigger is surprisingly pleasant on this model, with an early and quite soft break.
There is a Trigger Lock Safety just to the side of the Bolt should you need.
Included in the box are a Magazines, a Speedloader, Sling, Allen Keys and the two halves of the rifle itself. Whether you're looking for your first Sniper Rifle or want to pick up a project piece, then the AGM 002 fits the bill nicely.
Features
- L96 Platform Rifle
- Spring Powered
- 415FPS w/ 0.2g BB
- 20mm Railed Receiver
- Thumbhole Stock
- Speedloader Included
- Sling Included
- Solid Polymer Stock
- Weights Inside Stock
- Alloy/Aluminum Receiver
- Harris Style Bipod Lug
- Can Accept L96 RIS Adapter
- Adjustable Stock Length
- Adjustable Cheek Pad
- Slider Type HOP Adjust
- Front & Rear Sling Loops
- Threaded Outer Barrel
- Trigger Lock Safety
- Some Assembly Required
- Perfect Starter Sniper Rifle
